Woodrich Brand Wood Restoration 3-Piece Sample Kit (Cleaner, Stripper, Brightener)

Description

Product Overview

Test the power of a professional deck restoration workflow with the Woodrich Brand Wood Restoration 3-Piece Sample Kit. Engineered for homeowners, contractors, and DIYers, this all-in-one trial kit lets you eliminate the guesswork and evaluate real-world results on your specific wood type before purchasing a full-size container. Each sample formula covers approximately 9 square feet, making it the perfect cost-effective solution for testing small sections of exterior decks, fences, wood siding, log cabins, or interior hardwood furniture.

What’s Included in the 3-Piece Kit:

• EFC38 Wood Cleaner Sample: A concentrated, eco-friendly cleaner designed to lift deep-seated dirt, mold, mildew, and environmental buildup. It safely opens the wood grain to prepare the surface for optimal stripping or brightening penetration.
• HD80 Heavy Duty Wood Stripper Sample: An industrial-strength, fast-acting gel formula built to cut through tough, stubborn finishes, old solid-color stains, urethanes, varnishes, and latex paints. The cling-gel consistency stays in place on both vertical siding and horizontal deck boards without dripping.
• Citralic Wood Brightener & Neutralizer Sample: A biodegradable brightening agent that targets ugly tannin bleed, gray weathering, and dark streaks. It neutralizes the wood’s pH balance following chemical stripping, making the surface completely ready to hold a fresh coat of wood stain or sealer.

Key Performance Benefits:

• Complete Multi-Step Workflow: Clean, strip, and brighten/neutralize to see exactly how your wood responds at every single stage of a professional restoration project.
• Universal Wood Compatibility: Delivers premium results on both softwoods and hardwoods, including cedar, pressure-treated pine, redwood, oak, mahogany, and maple.
• Eco-Conscious Formula: Contains biodegradable, low-odor ingredients that rinse away cleanly and safely without releasing toxic fumes or damaging surrounding landscaping when used as directed
• Pressure Washer Prep Companion: Specially formulated to work efficiently with standard consumer or contractor-grade pressure washers (recommended 1,200–1,500 PSI) for easy rinsing.

How to Use Your Sample Kit

Prep

• Remove loose debris, dirt, or peeling finish with a stiff broom or scraper.
• Wet wood surface with clean water.

Step 1: Clean with EFC38 Wood Cleaner

• Mix the EFC38 sample with approximately 1 gallon of warm water (follow included measuring scoop).
• Apply liberally using a pump sprayer, garden sprayer, or stiff-bristle brush.
• Scrub gently in the direction of the wood grain until surface contaminants lift.
• Rinse thoroughly with a pressure washer (1,200–1,500 psi) or garden hose until runoff is clear.
• Allow wood to dry for 24–48 hours.

Step 2: Strip with HD80 Heavy Duty Wood Stripper

• Stir HD80 sample thoroughly before use.
• Apply a ¼–⅜-inch thick coat of HD80 to a 9 sq. ft. test area using a stiff-bristle brush or professional stripping brush.
• Let sit for 15–30 minutes (longer on multiple-coat finishes). Spray with water to check if finish is blistering, if not, wait an additional 5–10 minutes.
• Agitate with a stiff scraper or brush to lift remaining finish.
• Rinse surface completely with a pressure washer (1,200–1,500 psi).
• Inspect wood; repeat HD80 application if stubborn finish remains.
• Allow wood to dry 24–48 hours.

Step 3: Brighten & Neutralize with Citralic

• Pre-mix Citralic sample with 1 gallon of water per instructions.
• Saturate the test area using a pump sprayer, brush, or roller.
• Let Citralic dwell for 10–15 minutes; you should see wood grain “pop” and gray tannin bleed lift away.
• Lightly scrub with a soft nylon brush for deeper cleaning.
• Rinse thoroughly, neutralizing pH is essential before sealing or staining.
• Allow wood to dry completely (24–48 hours) before applying any sealant or stain.

Why Choose Our Sample Kit?

• Accurate Product Matching: Avoid expensive trial-and-error on your entire project. Use these 9 sq. ft. samples to decide which formulation(s) best suit your wood type and finish condition.
• Professional-Grade Quality: Formulated in the USA for contractors and DIYers. Our cleaners and strippers consistently outperform generic home-center brands.
• Cost-Effective Testing: At $10, this sample kit is a fraction of the cost of full-size bottles, perfect for small projects or for pros who need to evaluate on different wood species.
• Full Support & How-To Guides: Each kit includes a QR code linking to detailed video tutorials, application tips, and troubleshooting.
• Backed by Woodrich Brand: Established reputation in wood restoration since 2004. Thousands of satisfied customers trust our products for long-lasting results.

Tips & Best Practices

• Always Test in an Inconspicuous Area First: Wood age, species, previous stain color, and sun exposure can affect outcome. Confirm brightness and stripping power on a small section.
• Temperature & Weather: Apply products when air and surface temperatures are between 50°F–85°F. Avoid use on freezing or rainy days.
• Protect Surrounding Surfaces: Cover plants, grass, masonry, and any adjacent surfaces before applying chemicals.

Ready to Restore Your Wood?

Order your Wood Cleaner, Stripper, Brightener & Neutralizer Sample Kit now and see firsthand how each product performs. With a simple test on approximately 9 sq. ft. of surface area, you’ll know exactly which formulas you need for a professional-grade finish, no surprises, no unnecessary expense.

Add to Cart to get started today!